The wall is a key element in any home and the process of making them is one that should be taken seriously. Whether you’re trying to achieve a more rustic feel, a more modern look or both, there are plenty of options available. With a little work, it’s possible to create a design that’s both stunning and functional. From staining and painting to installing drywall, here are a few ways to get started.
Table of Contents
Paint
If you have knotty pine walls in your home, you can re-paint them or stain them to match your decor. But first, you should prepare the wood properly. Paint stripper is available to remove old paint from the wood. The old paint will probably contain lead, so you’ll need to protect yourself with a respirator mask.
If you’re painting over an existing varnish, you might need to apply a coat of shellac primer before you can get to the actual paint. This helps prevent stains from showing through the varnish. It also covers up any old smells that may have gotten into the wood. For more information, visit madereria.mx.
For the best results, you’ll want to use an oil-based primer. Unlike water-based paint, an oil-based primer won’t flake off and make the wood look dirty.
Stain
Pine is a popular wood for furniture and furniture panels. It is strong and shock resistant. The wood is also durable and stains very well.
The first step in painting pine furniture is to clean the wood. This removes any dust, sawdust or debris. You will need to use a tack cloth or a paintbrush to scrub the furniture.
Next, apply a coat of pre-stain wood conditioner. Wipe it off with a clean cloth before sanding or staining the wood. Do not apply too much, as it can fill in the pores of the wood and prevent the stain from setting in.
After applying the conditioner, sand the wood in the direction of the grain. Once the surface is smooth, apply two coats of varnish or polyurethane. Allow the varnish or polyurethane to dry for at least 24 hours.
Install drywall
When installing tongue and groove pine planks on your ceiling, there are a few steps you need to know. First, you need to remove any drywall over window frames. Next, you need to cut out a section of the plank to make room for the receptacle box.
You also need to sand the walls to remove any air bubbles. This can be done by using a drywall saw. Once the walls are sanded, you will need to apply a coat of primer. If you decide to paint the walls, you will need to apply at least two finishing coats.
Installing lumber on top of drywall can be more complicated. This requires a longer nail and extra preparation. A good way to install lumber is with a nail gun.
Modernize the look with throws and blankets
When you are trying to create a warm and welcoming atmosphere, knotty pine walls can be just the ticket. However, they can make a room feel a bit heavy if not complemented by the right furniture and lighting. You can easily modernize the look of a knotty pine wall with throws and blankets. This is a simple way to add a pop of color and texture to your interiors.
The key to a stylish living space is layering. Throws are the final layer in your design. Place them in a place that will enhance the look of everything else in the room. For example, a lighter blue couch throw could be paired with a darker blue rug and a white ceiling.
